- Browse Categories
- APIs 
- Intermediates 
- Agrochemicals 
- Evaporation Materials 
- Titanium products 
- Sputtering Targets 
- Hydroxyapatite 
- Others Material 
|Place of Origin:||China|
Grade of titanium plate
American Standard brands: GR1, GR2, GR3, GR5, GR7, GR12
Domestic brands: TA0, TA1, TA2, TA3, TA5, TA6, TA7, TA9, TA10, TB2, TC1, TC2, TC3, TC4
Tensile test method of 1: GB 228 metal
Grade and chemical composition of 2: GB/T 3620.1 titanium and titanium alloy
Allowable deviation of chemical composition and composition of 3: GB/T3620.2 titanium and titanium alloy products
Methods for chemical analysis of Ti, Ti and Fe alloys on 4: GB 4698 sea surface
GB: GB/3621-2007, GB/T13810-2007
B265 ASTM F136 American Standard: ASTM, ASTM, F67, AMS4928
Production specification of titanium plate:
T 0.5-1.0mm x W1000mm x L 2000-4000mm
T 1.0-5.0mm x W1000-1500mm x L 2000-3500mm
T 5.0- 30mm x W1000-2500mm x L 3000-6000mm
T 30- 80mm x W1000mm x L 2000mm
Hot working state (R)
Cold working state (Y)
Annealing state (M)
Forging process of hot forging above the recrystallization temperature of metal.
Rolling process of hot rolling at higher recrystallization temperature.
Rolling process of cold rolling with plastic deformation temperature lower than recovery temperature.
Annealing: a metal heat treatment process that heats the metal slowly to a certain temperature, keeps enough time, and then cools at a suitable speed (usually slow cooling and sometimes controlled cooling).
Pickling: immersed in aqueous solution such as sulfuric acid, to remove oxides and other films on the metal surface. It is the pretreatment or intermediate treatment of electroplating, enamel, rolling and other processes.
For more information, please send us email to:email@example.com; thanks advance!